MillingAnno**

Subject: **Milling**Anno** Sun Oct 18, 2009 1:47 pm

I have a new project I need help finding someone or some place that will mill a feedneck thread for me.

and then also a good anno shop if any local. will ship out if needed.

thanks guys

LMK

Subject: Re: **Milling**Anno** Sun Oct 18, 2009 4:21 pm

http://www.manta.com/company/mmf4vwd

Never used them but they are local. Let me know what you find out would be interested!

Subject: Re: **Milling**Anno** Sun Oct 18, 2009 4:29 pm

i know http://www.kohnsports.com/kohnlasering/anodizing.php does a great anno. i haven't used them, But i saw there jobs at world cup this year and it looked awesome!! Don't go though Gruntball anno.

Subject: my project this is what i need milled/Anno Sun Oct 25, 2009 5:50 pm

Thinking about the Sunset Orange.

Like my Sft Shocker. Other Ideas???

As you can see I need the Feedneck milled.

Posts : 100 Join date : 2008-12-16

autoe22 wrote:: I have a new project I need help finding someone or some place that will mill a feedneck thread for me.

and then also a good anno shop if any local. will ship out if needed.

thanks guys

LMK

Can you give me some details about what you want done to the feed neck?

Subject: Re: **Milling**Anno** Mon Oct 26, 2009 9:06 am

I will have to buy a feedneck and have it milled too fit this marker as it is now one will not fit.

The feedneck was cut down too a point that in a normal autococker feedneck it stops the hopper from going down any further.
I got it like this.

I am always open too better/more ideas. (10 Round tube) maybe??
Thanks for any help.

**Milling**Anno** Dsc01311

Posts : 100 Join date : 2008-12-16

I have an Angel Feedneck tap, a Cocker barrel tap and access to a Bridgeport vertical mill; but I'm not sure if that is what you are after... You may want to chat with Andy Grueninger www.WarpedAirSmithing.com and see what he can do for you.

Subject: Re: **Milling**Anno** Mon Oct 26, 2009 1:58 pm

I'm not too picky about the feedneck I just need one on it.
Would like it too be clamping but doesnt have too be.

Posts : 100 Join date : 2008-12-16

Spoke with the Father-in-Law today and he said he is ok with me using the Bridgeport to do the milling. If you want drop the body off with/at Norms some how and Norm can get it over to me.

Just so we are on the same page, we are going to try and mill the top flat across and tap it for an Angle feed neck.

Shawn

Subject: Re: **Milling**Anno** Wed Nov 04, 2009 2:21 pm

that is my first choice if there is enough too tap it after.
If not on top is fine I'm really not picky.

I will send norm an email shortly asking when would be the best time too drop it off.

Thanks again.

Im in no hurry so when ever you have time is more then fine.

Posts : 100 Join date : 2008-12-16

I was unable to mill the top off like we talked about; there just was not going to be enuff meat left after drilling and tapping.

I did get the top tapped for you and will give it to Norm tomorrow at work. I've got an old ULE feed neck I'll let you have, they are about useless but at least you will have a feed neck. A nice clamping one is your best bet and I like the one that Rogue has http://www.pblegion.com/showthread.php?t=4307

Subject: Re: **Milling**Anno** Thu Nov 12, 2009 11:04 am

Ok sounds good thanks for all the help when its done I will have to make sure you get credit.